Kia Spectra 2004 - MAIN SILENCER; REMOVAL

4. Remove two gaskets.
INSTALLATION
1. Lubricate inside of two pre-silencer hangers with a silicone lubricant.
2. Clean mating surfaces as required.
3. Install two new gaskets on bolts.
4. Install two nuts at main-silencer flange.
Tightening torque: 27.4~38.3 lb.ft (37.2~51.9 N.m, 3.8~5.3 kg.m)
5. Install pre-silencer in two hangers.
6. Install two nuts at forward flange of the pre silencer.
Tightening torque: 27.4~38.3 lb.ft (37.2~51.9 N.m, 3.8~5.3 kg.m)
MAIN SILENCER
REMOVAL
1. Remove two nuts at main-silencer flange.
2. Remove three supports from main-silencer.
CAUTION: A hot exhaust system can produce a serious burn.
2004 Kia Spectra
2004 ENGINES 1.8L 4-Cylinder
domingo, 7 de febrero de 2021 08:29:55 a. m. Page 331 © 2011 Mitchell Repair Information Company, LLC.