445
1
2
3
4
5
6
7
8
9
Driving your vehicle
Variable intermittent wipers
Set the lever to the INT position and
choose the desired wiper interval by
turning the ring(➀).
One - touch wiper
For a single wiping cycle, push the
lever upward and release it with the
lever in the OFF position.
The wipers will operate continuously
if the lever is pushed upward and
held.
✽✽
NOTICE
• To prevent possible damage to the
wipers or windshield, do not oper-
ate the wipers when the wind-
shield is dry.
• To prevent damage to the wiper
blades, do not use gasoline,
kerosene, paint thinner, or other
solvents on or near them.
• To prevent damage to the wiper
arms and other components, do
not attempt to move the wipers
manually.
1LDN2108B 1LDN2108C
To Next Page
Loading...
