ADAS
ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS)
COLLISION WARNING
EMERGENCY BRAKING
Forward Collision-Avoidance Assist
(FCA) is not a substitute for safe driving
and may not detect all objects in front
of the vehicle Always drive safely and
use caution
Actual User Settings steps may vary
by model For illustrative purposes
only Your actual display, buttons and/
or features may vary Refer to section
5 in the Owner’s Manual for more
information
Forward Collision-Avoidance Assist (FCA)
†6
FCA is designed to detect and monitor a vehicle ahead or detect a
pedestrian in the roadway through front view camera recognition and front
radar signals to warn the driver that a collision is imminent, and if necessary,
temporarily apply emergency braking If FCA detects a potential collision,
FCA emits an audible warning and visual alert on the instrument cluster
A
If the system detects that the collision risk has increased, Forward Collision-
Avoidance Assist (FCA) automatically
applies the brakes to reduce your
speed, potentially helping to reduce
the effects of a possible collision
FCA User Settings:
• FCA is ON by default in most Kia models FCA can be activated or
deactivated by going to the User Settings in the Instrument Cluster
• To go to User Settings , press the Mode button
B
on the Steering
Wheel when the vehicle is at a standstill, gear shift in Park and the ignition
on or the Engine Start/Stop button* in the ON position
• Press the OK button
C
up/down and select User Settings then Driver
Assistance, go to Forward Safety and select Active Assist, Warning Only or Off
• Active Assist: Vehicle will provide a warning (audible & visual) and apply the
brakes if needed
• Warning Only: Vehicle will provide a warning only (audible & visual)
• Off: FCA is off, no warnings or braking provided
• To adjust FCA initial Warning Timing, go to User Settings , Driver
Assistance, Warning Timing, then select an option:
– Early/Normal/Standard: Maximizes the amount of distance between
the vehicles before the initial warning occurs
– L a t e : Reduces the amount of distance between the vehicles before
the initial warning occurs
The default settings for Warning Timing is set to Normal If the Warning Timing is
changed, the warning time of other Driver Assistance systems may also change
FCA will become active when the:
• Ignition is on or the Engine Start/Stop button* is ON
• Vehicle is traveling faster than 5 mph
• Electronic Stability Control (ESC) is ON
RES
OK
SET
(Button layout on right of
steering wheel)
Refer to the inside front cover for
more information on QR codes
wwwyoutubecom/KiaFeatureVideos
Forward Collision-
Avoidance Assist (FCA)
Video
QR CODE
†
LEGAL DISCLAIMERS ON BACK INSIDE COVER
*IF EQUIPPED
12
STINGER FEATURES & FUNCTIONS GUIDE
REMINDERS:
• FCA will be activated by default
when the ignition is cycled ON, even
when previous setting was OFF
• If FCA is operating and the ESC
(Electronic Stability Control) is
turned off, FCA is automatically
turned off
• When FCA is off, the FCA warning
indicator is on in the Instrument
Cluster
• FCA Warning Volume can be
adjusted in the User Settings
in the Instrument Cluster
or the Vehicle Settings* on the
audio head unit Go to Driver
Assistance, then Warning
Volume
QUICK TIP
A
B
C
To Next Page
Loading...
