Kia stinger 2022 - Blind-Spot Collision-Avoidance Assist (BCA)

ADAS
Blind-Spot Collision-Avoidance Assist (BCA)
†6
BCA uses rear corner radar sensors in the rear bumper to monitor and warn
the driver in certain situations if it detects an approaching vehicle in the
driver’s blind spot area and before changing lanes Initially, BCA provides
Blind-Spot Collision Warning (BCW) when it detects a potential collision
with a vehicle, emitting an audible warning and visual alert on the outside
rearview mirrors If the system detects that the collision risk has increased,
Blind-Spot Collision-Avoidance Assist (BCA) automatically applies the
opposite side front brake to try and mitigate a potential collision
• 1st-stage: When another vehicle is detected within BCW warning
boundary
A
, an indicator will illuminate on the outside rearview
mirrors
B

• 2nd-stage: When 1st stage warning is on and the driver activates a turn
signal, a 󲛶ashing indicator will illuminate on the outside rearview mirrors
and the system will sound a warning
• 3 r d - s t a g e : When 1st stage warning is on and the 2nd stage warning has already
occurred, and the collision risk has increased, braking is applied to the opposite
side front wheel and a visual warning occurs
BCA User Settings:
To turn BCA on, go to the User Settings menu in the Instrument
Cluster, press the Mode button
C
on the Steering Wheel when the
vehicle is at a standstill, gear shift in Park and with the ignition switch
or the Engine Start/Stop button* in the ON position, and select User
Settings  Press the Move (OK) button
D
up/down and select Driver
Assistance, Blind-Spot Safety and then press the OK button
D

Some models access settings through the Vehicle Settings in the
audio head unit Press the Setup hard key on the audio head unit, then
Vehicle on the screen to enter Vehicle Settings
To set BCA when in Blind-Spot Safety, select:
• Active Assist: BCA will provide a warning (audible & visual) and may
activate Electronic Stability Control (ESC) and temporarily apply
braking power
• Warning Only: Vehicle will provide a warning only (audible & visual)
• Off: System is off, no warnings provided
To set the initial warning activation time, go to User Settings , then
Driver Assistance, Warning Time and press the OK button
D
 Adjust
the warning timing:
• Early/Normal: Maximizes the amount of distance between the
vehicles before the initial warning occurs
• L a t e : Reduces the amount of distance between the vehicles before
the initial warning occurs
(Blind-spot area monitoring)
ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS)
RES
OK
SET
(Button layout on right of
steering wheel)
Refer to the inside front cover for
more information on QR codes
wwwyoutubecom/KiaFeatureVideos
Blind-Spot Collision-
Avoidance Assist (BCA)
Video
QR CODE
†
LEGAL DISCLAIMERS ON BACK INSIDE COVER
*IF EQUIPPED
14
STINGER FEATURES & FUNCTIONS GUIDE
A
B
C
D