ADAS
Blind-Spot Collision-Avoidance Assist (BCA)
†6
(continued)
REMINDERS:
• BCW will not issue a warning if the
vehicle speed is 6 mph or more above the
surrounding vehicles
• When BCW is ON and the ignition is cycled,
BCW returns to its previous state
• BCW is a supplemental system Do not solely
rely on this system Always pay attention to
the road and drive safely
ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS)
The BCA system is not a substitute for safe and proper driving Always drive safely and use caution
Refer to section 5 in the Owner’s Manual for more information
The images on this page are for illustrative purposes only and may not reect actual feature or operation
Safe Exit Assist (SEA)
†6
Safe Exit Assist can help prevent passengers from opening their door by
displaying a warning message on the Instrument Cluster and sounding an
audible warning when a vehicle is detected, approaching from behind, after
your vehicle has stopped
SEA warns the driver of the risk of collision with a vehicle approaching the
blind spot area
To turn on SEA, go to User Settings in the Instrument cluster or press SETUP
in the Vehicle Settings* in the audio head unit, then select Driver Assistance,
Blind-Spot Safety, and select Safe Exit Assist
Images are for illustrative purposes
only and may not reect actual feature
or operation
See section 4 in the Owner’s Manual
for more information
Refer to the inside front cover for
more information on QR codes
wwwyoutubecom/KiaFeatureVideos
Safe Exit Assist (SEA)
Video
QR CODE
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE
OPERATING INFORMATION AND SAFETY WARNINGS
†
LEGAL DISCLAIMERS ON BACK INSIDE COVER
*IF EQUIPPED
15
• BCW Warning Volume can be adjusted in the User Settings
in the Instrument Cluster or the Vehicle Settings* on the audio
head unit Go to Driver Assistance, then Warning Volume
• BCW will activate when:
- The system is turned on
- Other vehicles are detected on the rear sides of the vehicle
- Vehicle speed is above approximately 20 mph
QUICK TIPS
To Next Page
Loading...
