Kia stinger 2022 - Electric Parking Brake (EPB)

P
R
N
D
AUTO
HOLD
DRIVE MODE
OFF
OFF
P
See section 5 in the Owner’s Manual for more
information
The Electric Parking Brake (EPB) system utilizes an electric motor to engage
the parking brake
Applying the Parking Brake
Depress the brake pedal and pull up the EPB switch
A
 Ensure that the
indicator light is illuminated on the instrument cluster
Releasing the Parking Brake
The EPB will automatically release when the shifter is placed in Reverse or
Drive To release EPB manually, depress the brake pedal, then press the
EPB switch
A
, with the ignition switch in the ON position Ensure that the
indicator light is OFF
Electric Parking Brake (EPB)*
CENTER PANEL
Refer to the inside front cover for
more information on QR codes
wwwyoutubecom/KiaFeatureVideos
Electric Parking Brake /
Auto Hold Video
QR CODE
*IF EQUIPPED
46
STINGER FEATURES & FUNCTIONS GUIDE
• Pull up and hold EPB switch again to
increase brake pressure if parked on a
decline or incline
• When leaving your keys with parking lot
attendants or valet, make sure to inform
them how to operate the EPB
• If parked on a steep incline, pull up the EPB
switch for more than 3 seconds for a 󲛵rmer
EPB application
QUICK TIPS
REMINDERS:
• The EPB malfunction indicator will illuminate for approximately
3 seconds as a bulb check when the ignition switch is turned ON
• If the warning light does not illuminate temporarily or remains
continuously lit, take your vehicle to an authorized Kia dealer
and have the system checked
• The EPB should not be operated while the vehicle is moving
• A click or electric brake motor sound may be heard while
operating or releasing the EPB These conditions are normal and
indicate that the EPB is functioning properly
• EPB will not release unless the hood, liftgate and all doors are
closed and seat belts are fastened
CENTER
PANEL
A