51
4
4
Features of your vehicle Instrument cluster
Instrument Cluster Control
Adjusting Instrument Cluster Illu
-
mination
Never adjust the instrument cluster
whilst driving. This could result in loss of
control and lead to an accident that may
cause death, serious injury, or property
damage.
The brightness of the instrument panel
illumination is changed by pressing the
illumination control button (“+” or “-”)
when ENGINE START/STOP button is
ON, or the tail lights are turned on.
僅 If you hold the illumination control
button (“+” or “-”), the brightness will
be changed continuously.
僅 If the brightness reaches to the maxi
-
mum or minimum level, an alarm will
sound.
LCD Display Control
The LCD display modes can be changed
by using the control buttons on the
steering wheel.
1. : MODE button for change the LCD
MODES
2. ∧/∨: MODE scroll switch for select
the items
3. OK : SET/RESET button for the set the
items or reset the items
To Next Page
Loading...
