85
5
5
Driving your vehicle Blind-Spot Collision-Avoidance Assist (BCA)
Blind-Spot Collision Warning may not
operate properly when driving on a
slope. The function may not detect the
vehicle in the next lane or may incor
-
rectly detect the ground or structure.
Always pay attention to road and driving
conditions whilst driving.
Driving where the heights of the lanes
are different
Blind-Spot Collision Warning may not
operate properly when driving where the
heights of the lanes are different. The
function may not detect the vehicle on a
road with different lane heights (under
-
pass joining section, grade separated
intersections, etc.).
Always pay attention to road and driving
conditions whilst driving.
Blind-Spot Collision Warning may not
operate normally if interfered by strong
electromagnetic waves.
Blind-Spot Collision Warning may not
operate for 3 seconds after the vehicle is
started, or the rear corner radars are ini
-
tialized.
Blind-Spot Collision-Avoid
-
ance Assist (BCA) (if
equipped)
Blind-Spot Collision-Avoidance Assist is
designed to help detect and monitor
approaching vehicles in the driver’s
blind spot area and warn the driver of a
possible collision with a warning mes
-
sage and audible warning.
In addition, if there is a risk of collision
when changing lanes or driving forward
out of a parking space, Blind-Spot Colli
-
sion-Avoidance Assist will help avoid col
-
lision by applying the Differential
braking.
Blind-Spot Collision-Avoidance Assist
help detects and informs the driver that
a vehicle is in the blind spot.
The detecting range may vary depend
-
ing on the speed of your vehicle. Even if
there is a vehicle in the blind spot, the
function may not warn you when you
pass by at high speeds.