87
5
5
Driving your vehicle Blind-Spot Collision-Avoidance Assist (BCA)
[1] : Front view camera, [2] : Rear corner
radar
Refer to the picture above for the
detailed location of the detecting sen
-
sors.
Take the following precautions to main
-
tain optimal performance of the detect
-
ing sensor:
僅 Never disassemble the rear corner
radar or radar assembly, or apply any
impact on it.
僅 If there is impact on the rear corner
radar or near the radar, even though
the warning message does not appear
on the cluster, Blind-Spot Collision-
Avoidance Assist may not operate
properly. We recommend that you
have your vehicle inspected by an
authorised Kia dealer/service partner.
僅If the rear corner radars have been
replaced or repaired, we recommend
that you have your vehicle inspected
by an authorised Kia dealer/service
partner.
僅 Use only genuine parts or those of an
equivalent standard to repair the rear
bumper where the rear corner radar is
located.
僅 Do not apply license plate frame or
objects, such as a bumper sticker, film
or a bumper guard near the rear cor
-
ner radar.
僅 Blind-Spot Collision-Avoidance Assist
may not work properly if the bumper
has been replaced, or the surround
-
ings of the rear corner radar has been
damaged or paint has been applied. If
a trailer, carrier, etc. is installed, it may
adversely affect the performance of
the rear corner radar or Blind-Spot
Collision-Avoidance Assist may not
operate.
For more details on the precautions of
the front view camera, refer to "Forward
Collision-Avoidance Assist (FCA) (Sen
-
sor fusion) (if equipped)" on page 5-58.
Blind-Spot Collision-Avoidance
Assist settings
Settings features
Blind-Spot Safety
With the ENGINE START/STOP button in
the ON position, select or deselect
‘Driver Assistance → Blind-Spot Safety’
from the “User Settings (LCD display) or
Settings → Vehicle (Infotainment System
To Next Page
Loading...
