Driving your vehicle
1125
Blind-Spot View Monitor (BVM)
Type C
僅 Blind-Spot View Monitor displays the
left or right side of the rear blind spot
area of your vehicle in the instrument
cluster when the left or right turn sig
-
nal is on.
Blind-Spot View Monitor
Operating conditions
僅 Blind-Spot View Monitor is activated
when the following steps are per
-
formed.
- Turn signal is ON
Off conditions
僅 Turn signal is OFF
僅 Hazard warning flasher is ON
僅 Other warnings pops up and takes
priority over the Blind-Spot View Mon
-
itor
Blind-Spot View Monitor mal
-
function
Blind-Spot View Monitor mal
-
function
僅 When Blind-Spot View Monitor is not
working properly, or the cluster dis
-
play flickers, or the camera image
does not display normally, we recom
-
mend that you have your vehicle
inspected by an authorised Kia
dealer/service partner.
僅 A wide-angle lens is used for Blind-
Spot View Monitor. There may be a
difference between actual object dis
-
tance and visual object distance due
to correction of the image distortion.
Pay attention to the road conditions
and surroundings at all times.
僅 The camera may not work normally if
the lens is covered with foreign mate
-
rial. Always keep the camera lens
clean.
To Next Page
Loading...
