Driving your vehicle
1145
Smart Cruise Control (SCC)
If your vehicle speed is between 0~ 30
km/h (0~ 20 mph) when you press the
Driving Assist button, Smart Cruise
Control speed will be set to 30 km/h (20
mph).
Setting Vehicle Distance
Each time the Vehicle Distance button is
pressed, the Vehicle Distance changes
as follows:
僅 If you drive at 90 km/h (56 mph), the
distance is maintained as follows:
- Distance 4 - approximately 52.5 m
(172 ft.)
- Distance 3 - approximately 40 m
(130 ft.)
- Distance 2 - approximately 32.5 m
(106 ft.)
- Distance 1 - approximately 25 m (82
ft.)
僅 The distance is set to the last set dis
-
tance when the engine is restarted, or
when Smart Cruise Control was tem
-
porarily cancelled.
Increasing the set speed
僅 Push up the + switch, and release it
immediately. The set speed will
increase by 1 km/h (1 mph) each time
the switch is operated in this manner.
僅 Push up the + switch, and hold it
whilst monitoring the set speed on the
cluster. The set speed will increase by
10 km/h or 5 mph each time the
switch is operated in this manner.
Release the switch when the desired
speed is shown, and the vehicle will
accelerate to that speed. You can
increase the set speed to 200 km/h
(120 mph).
Check the driving condition before using
the + switch. Driving speed may sharply
increase when you push up and hold the
+ switch.
To Next Page
Loading...
