61
4
4
Features of your vehicle Instrument cluster
Instrument cluster control
Adjusting Instrument Cluster Illu
-
mination
The brightness of the instrument panel
illumination is changed by pressing the
illumination control button (“+” or “-”)
when the ENGINE START/STOP button
is ON, or the taillights are turned on.
僅 If you hold the illumination control
button (“+” or “-”), the brightness will
be changed continuously.
僅 If the brightness reaches to the maxi
-
mum or minimum level, an alarm will
sound.
LCD display control
The LCD display modes can be changed
by using the control buttons on the
steering wheel.
1. : MODE button for change the LCD
MODES
2. / : MODE scroll switch for select
the items
3. OK : SET/RESET button for the set the
items or reset the items
* For the LCD modes, refer to "LCD dis
-
play" on page 4-67.
To Next Page
Loading...
