Features of your vehicle
1104
Lighting
Auto light
When the light switch is in the AUTO
light position, the taillights and head
-
lights will turn ON or OFF automatically
depending on the amount of light out
-
side the vehicle.
僅 Never place anything over the sensor
(1) located on the instrument panel,
this will ensure better auto-light sys
-
tem control.
僅 Don’t clean the sensor using a window
cleaner, the cleaner may leave a light
film which could interfere with sensor
operation.
僅 If your vehicle has window tint or
other types of metallic coating on the
front windshield, the Auto light system
may not work properly.
High beam operation
To turn on the high beam headlamp,
push the lever away from you when the
headlight is on.
The high beam indicator will light when
the headlight high beams are switched
on.
To prevent the battery from being dis
-
charged, do not leave the lights on for a
prolonged time while the engine is not
running.
Do not use high beam when there are
other vehicles. Using high beam could
obstruct the other driver’s vision.
To flash the headlights, pull the lever
towards you. It will return to the normal
To Next Page
Loading...
