115
4
4
Features of your vehicle Wipers and washers
positions. After turning the DBL off,
headlamp swiveling no longer occurs,
but leveling operates continuously.
If the DBL malfunction indicator comes
on, the DBL is not working properly.
Drive to the nearest safe location and
restart the engine. If the indicator contin
-
uously remains on, have your vehicle
checked by an authorized Kia dealer as
soon as possible.
Wipers and washers
Windshield wiper/washer
A : Wiper speed control (front)
僅 MIST – Single wipe
僅 OFF – Off
僅 AUTO – Auto control wipe (Rain sen
-
sor)
僅 LO – Low wiper speed
僅 HI – High wiper speed
B : Intermittent control wipe time
adjustment
C : Wash with brief wipes (front)*
Windshield wipers
Operates as follows when the ignition
switch is turned ON.
MIST : For a single wiping cycle, move
the lever to this (MIST) position and
release it. The wipers will operate contin
-
uously if the lever is held in this position.
OFF : Wiper is not in operation
LO : Normal wiper speed
HI : Fast wiper speed
If there is heavy accumulation of snow
or ice on the windshield, defrost the
windshield for about 10 minutes, or until
the snow and/or ice is removed before
To Next Page
Loading...
