Driving your vehicle
105
ISG (Idle Stop and Go) system
The side with the lock button should
contact the ENGINE START/STOP
button directly.
When you press the ENGINE START/
STOP button directly with the smart
key, the smart key should contact the
button at a right angle.
僅 When the stop lamp fuse is blown,
you can't start the engine normally.
Replace the fuse with a new one. If it
is not possible, you can start the
engine by pressing the ENGINE
START/STOP button for 10 seconds
while it is in the ACC position. The
engine can start without depressing
the brake pedal. But for your safety
always depress the brake pedal
before starting the engine.
Do not press the ENGINE START/ STOP
button for more than 10 seconds except
when the stop lamp fuse is blown.
ISG (Idle Stop and Go) system
Your vehicle may be equipped with the
ISG system, which reduces fuel con
-
sumption by automatically shutting
down the engine, when the vehicle is at
a standstill. (For example: red light, stop
sign and traffic jam)
The engine starts automatically as soon
as the starting conditions are met.
The ISG system is ON whenever the
engine is running.
When the engine automatically starts by
the ISG system, some warning lights
(ABS, ESC, ESC OFF, MDPS or parking
brake warning light) may turn on for a
few seconds.
This happens because of low battery
voltage. It does not mean the system has
malfunctioned.
Auto stop
To stop the engine in idle stop
mode
Type A
To Next Page
Loading...
