75
5
5
Driving your vehicle Blind-Spot Collision-Avoidance Assist (BCA)
When changing lanes by detecting the
lane ahead, if the function judges that
there is a collision risk with an approach
-
ing vehicle in the blind spot, the function
will help avoid collision by applying the
differential brake.
BCA stands for Blind-Spot Collision-
Avoidance Assist.
Detecting sensor
[1] : Front view camera, [2] : Rear corner
radar
Refer to the picture above for the
detailed location of the detecting sen
-
sors.
Take the following precautions to main
-
tain optimal performance of the detect
-
ing sensor:
僅 Never disassemble the rear corner
radar or radar assembly, or apply any
impact on it.
僅 If there is impact on the rear corner
radar or near the radar, even though
the warning message does not appear
on the cluster, Blind-Spot Collision-
Avoidance Assist may not operate
properly. In this case, have your vehi
-
cle inspected by an authorized Kia
dealer.
僅 If the rear corner radars have been
replaced or repaired, have your vehi
-
cle inspected by an authorized Kia
dealer.
僅 Use only genuine parts to repair the
rear bumper where the rear corner
radar is located.
僅 Do not apply license plate frame or
objects, such as a bumper sticker, film
To Next Page
Loading...
