Maintenance
748
Light bulbs
Glove box lamp bulb replacement
1. Using a flat-blade screwdriver, gently
pry the lamp assembly from interior.
2. Remove the bulb by pulling it straight
out.
3. Install a new bulb in the socket.
4. Install the lamp assembly to interior.
Be careful not to dirty or damage the
lens, lens tab, and plastic housings.
Tailgate room lamp bulb replace
-
ment
1. Using a flat-blade screwdriver, gently
pry the lens cover from lamp housing.
2. Remove the bulb by pulling it straight
out.
3. Install a new bulb in the socket.
4. Align the lens cover tabs with the
lamp housing notches and snap the
lens into place.
Be careful not to dirty or damage the
lens, lens tab, and plastic housings.
If the LED lamp does not operate, have
your vehicle checked by a professional
workshop. Kia recommends to visit an
authorised Kia dealer/service partner.
To Next Page
Loading...
