Kia Stonic YB 2021 - FCA Warning Message and Function Control

9
5
5
Driving your vehicle Forward Collision-Avoidance Assist (FCA)
(Sensor fusion)
function setting on the LCD dis
-
play.
䳜 FCA automatically deactivates
upon canceling ESC. 8hen ESC is
cancelled, FCA cannot be acti
-
vated on the LCD display.
FCA warning light will illuminate.
FCA warning message and function
control
FCA produces warning messages,
warning alarms, and emergency
braking based on the level of risk of
a frontal collision, such as when a
vehicle ahead suddenly brakes, or
when the function detects that a
collision with a pedestrian is immi
-
nent.
The driver can select the initial
warning activation time in the User
Settings in the LCD display. The
options for the initial Forward Colli
-
sion 8arning include Early, Normal
or Late initial warning time.
Collision Warning (st warning)
䳜 The warning message appears on
the LCD display with the warning
alarms.
Additionally, some vehicle interven
-
tion occurs by the engine manage
-
ment function to help decelerate
the vehicle.
The vehicle may slow down slightly.
䳜 It will operate if the vehicle speed
is greater than 10 km/h (6 mph)
and less than or equal to 180km/h
(110 mph) on a forward vehicle.
(Depending on the condition of
the vehicle ahead and the envi
-
ronment surrounding it, the pos
-
sible maximum operating speed
may be reduced.)
䳜 For pedestrian and cyclist, the
vehicle speed is greater than or
equal to 10 km/h (6 mph) and less
than 8 km/h (3 mph). (Depend
-
ing on the condition of pedestrian
and cyclist and the surrounding
environment the possible maxi
-
mum operating speed may be
reduced.)
- If you select "8arning only",
FCA activates and produces
only warning alarms in accor
-
dance with the collision risk lev
-
els. You should control the
brake directly because FCA do
not control the brake.
OYB050152R