Driver assistance system
46
Forward Collision-Avoidance Assist (FCA) (Sensor Fusion)
Front radar
Refer to the picture above for the
detailed location of the detecting sen
-
sors.
僅 Never disassemble the detecting sen
-
sor or sensor assembly, or cause any
damage to it.
僅 If the detecting sensors have been
replaced or repaired, have the vehicle
inspected by a professional workshop.
Kia recommends that you visit an
authorised Kia dealer/service partner.
僅 If the radar or around the radar expe
-
riences an impact, Forward Collision-
Avoidance Assist may not operate
properly even if a warning message is
not displayed on the cluster. Kia rec
-
ommends that you visit an authorised
Kia dealer/service partner.
僅 Never install any accessories or stick
-
ers on the front windscreen, or tint the
front windscreen.
僅 Pay extreme caution to keep the front
view camera dry.
僅 Never place any reflective objects (for
example, white paper, mirror) over the
instrument panel.
僅 Do not place any objects near the
front windscreen or install any acces
-
sories on the front windscreen. It can
affect the performance of the defog
-
ging and defrosting function of the cli
-
mate control system, which may
prevent the Driver Assistance systems
from operating.
僅 Do not apply license plate frame or
objects, such as a bumper sticker, film
or a bumper guard, near the front
radar cover.
僅 Always keep the front radar and cover
clean and free of dirt and debris.
Use only a soft cloth to wash the vehi
-
cle. Do not spray pressurized water
directly on the sensor or sensor cover.
僅 The genuine Kia front radar sensor
covers are parts with quality and per
-
formance ensured. If arbitrarily apply
-
ing paint on or changing the cover,
Forward Collision-Avoidance Assist
may not function properly.
Use only Kia Genuine Parts or those
of an equivalent standard with proven
quality and performance to repair or
replace the radar sensor covers.
僅 If a trailer, carrier, etc. is installed, it
may adversely affect the performance
of Forward Collision-Avoidance Assist
may not operate properly.
僅 Do not arbitrarily attach objects
(accessories, moldings, stickers, films,
packaging materials, etc.) to the
detection sensor or its surroundings,
or paint the bumper.
Forward Collision-Avoidance
Assist settings
Forward Safety
1 Driver Assistance
OAYI054011
To Next Page
Loading...
