Driver assistance system
206
Manual Speed Limit Assist (MSLA)
Manual Speed Limit Assist
(MSLA) (if equipped)
1
Speed Limit indicator
2
Set speed
You can set the speed limit when you do
not want to drive over a specific speed.
If you drive over the preset speed limit,
Manual Speed Limit Assist operates (set
speed limit will blink and chime will
sound) until the vehicle speed returns
within the speed limit.
Manual Speed Limit Assist opera
-
tion
Setting speed limit
1. Press and hold Driving Assist ( ) but
-
ton at the desired speed. The Speed
Limit ( ) indicator will appear
on the cluster.
2. Push the (+) switch up or (-) switch
down, and release it at the desired
speed. The set speed will increase by 1
km/h (1 mph) each time the switch is
operated in this manner.
Push the (+) switch up or (-) switch
down and hold it. The speed will
increase or decrease to by multiple of
10km/h (5 mph).
3. The set speed limit will be displayed
on the cluster.
If you would like to drive over the pre
-
set speed limit, depress the accelera
-
tor pedal.
The set speed limit will blink and
chime will sound until you return the
vehicle speed within the speed limit.
To drive faster than the set speed limit,
press the accelerator pedal deeply until
the kickdown function activates.
Temporarily pausing Manual
Speed Limit Assist
Press the ( ) switch to temporarily
pause the set speed limit. The set speed
limit will turn off but the Speed Limit
( ) indicator will stay on.
OGL3054223L
OAYI054034
OAYI054035
ODL3053132L
To Next Page
Loading...
