Driver assistance system
546
Surround View Monitor (SVM)
Surround View Monitor is activated in
R (Reverse) mode.
The 3D view function of the Surround
View Monitor whilst parking will be
turned off under the following condi
-
tions:
僅 Shifting from N (Neutral) or D (Drive)
to P (Parking)
僅 Pressing the Parking/View button (1)
僅 Pressing the back button (3) on the
Surround View Monitor screen
僅 Pressing the infotainment system
power button (4)
僅 Driving faster than 10 km/h (6 mph)
When the vehicle is in R (Reverse), the
3D view function of the Surround View
Monitor will be turned off under the fol
-
lowing conditions:
僅 Shifting to P (Parking)
僅 The 3D view does not display parking
guidelines.
僅 The top view screen, which is dis
-
played with a Front/Rear view or 3D
view, converts the original images
entered from the four wide-angle
cameras to provide a 360-degree
image around the vehicle that is
viewed down.
僅 Top view is not displayed with front/
rear wide view.
Surround View Monitor malfunc
-
tion and limitations
Surround View Monitor malfunc
-
tion
If the surround view monitor malfunc
-
tions, it may display green, blue, gray or
black.
When Surround View Monitor is not
working properly, or the screen flickers,
or the camera image does not display
normally, Kia recommends visiting an
authorised Kia dealer/service partner.
Limitations of Surround View
Monitor
僅 When the vehicle is stopped for a long
time in winter or when the vehicle is
parked in an indoor car park, the
exhaust fumes may temporarily blur
the image.
僅 The screen may be displayed abnor
-
mally, and an icon will appear at the
top left side of the screen under the
following circumstances:
- The tailgate is opened.
- The driver or front passenger door
is opened.
- The outside rear view mirror is
folded.
僅 ALWAYS look around your vehicle to
make sure there are no objects or
obstacles before moving the vehicle.
What you see on the screen may dif
-
fer from the actual vehicle's location.
僅 The distance to the object shown on
the screen may differ from the actual
distance. This is because the image
shown on Surround View Monitor is
displayed by calibrating the image
from the wide-rear view camera.
When the vehicle is tilted by cargo
loading, rear parking guidelines may
not be correct. Make sure to directly
check the vehicle's surroundings for
safety.
僅 Surround View Monitor is designed to
be used on a flat surface. Therefore, if
used on roads with different heights
such as kerbs and speed bumps, the
To Next Page
Loading...
