Kia XCeed 2020 - High Beam Operation

4
Features of your vehicle Lighting
4
125
Theignitionswitchmustbein
theONpositiontoturnonthe
headlights.
Auto light position
OCDW049090
WhenthelightswitchisintheAUTO
lightposition,thetaillights(bulb
type)andheadlightswillbeturned
ONorOFFautomaticallydepending
ontheamountoflightoutsidethe
vehicle.
However,LEDtypetaillightisalways
onregardlessoftheamountoflight
outsidethevehicle.
CAUTION
• Neverplaceanythingoversensor
(1)locatedontheinstrument
panel,thiswillensurebetterauto-
lightsystemcontrol.
• Don’tcleanthesensorusinga
windowcleaner,thecleanser
mayleavealightfilmwhichcould
interferewithsensoroperation.
• Ifyourvehiclehaswindowtintor
othertypesofmetalliccoating
onthefrontwindshield,the
Autolightsystemmaynotwork
properly.
High beam operation
OCDW049441
Toturnonthehighbeamheadlights:
• Pushtheleverawayfromyou.
Pullitbackforlowbeams.
Thehighbeamindicatorwilllight
whentheheadlighthighbeams
areswitchedon.Topreventthe
batteryfrombeingdischarged,
donotleavethelightsonfora
prolongedtimewhiletheengineis
notrunning.
WARNING
Donotusehighbeamwhenthere
areothervehicles.Usinghighbeam
couldobstructtheotherdriver’s
vision.
Toflashtheheadlights: