Kia XCeed 2020 - Leading Vehicle Departure Alert (if Equipped); System Setting And Operating Conditions

6
Driving your vehicle Leading vehicle departure alert
6


113
Leading vehicle departure alert
(if equipped)
TheLeadingVehicleDepartureAlert
systemalertsthedriverofthe
departureofthevehicleinfront
whenthevehicleisstoppedandthe
SmartCruiseControl(SCC)systemis
inactivation.
System setting and operating
conditions
System setting
WiththeengineON,theLeading
VehicleDepartureAlertsystem
turnsonandgetsreadytobe
activatedwhenthe‘UserSettings→
DriverAssistance→DrivingAssist
→Leadingvehicledeparturealert’is
selectedonthecluster.Thesystem
stopsoperationwhenthesetting
isdeactivated.However,ifthe
engineisturnedoffthenonagain,
thesystemmaintainstheprevious
state.
Operating conditions
OJF058402L
WhiletheSmartCruiseControl
(SCC)systemisinoperation,your
vehiclestopsbehindthevehiclein
frontwhenitstops.Themessage
isdisplayedontheclusterwithin
3secondsafterthestopandthe
systemwillbeinthestandby
position.
System activation
OCDW059109
Ifthedriverdoesnottakeactionfor
acertainperiodoftimeafterthe
vehicleinfrontdeparts,themessage
isdisplayedonthecluster.