Kia XCeed 2020 - Page 529

7
What to do in an emergency IF YOU HAVE A FLAT TIRE (WITH SPARE TIRE)
7
23
Changing a tire
• Topreventvehiclemovement
whilechangingatire,always
settheparkingbrakefully,and
alwaysblockthewheeldiagonally
oppositethewheelbeingchanged.
• Werecommendthatthewheels
ofthevehiclebechocked,andthat
nopersonremaininavehiclethat
isbeingjacked.
OCDW069019
6.Loosenthewheellugnuts
counterclockwiseoneturneach,
butdonotremoveanynutuntil
thetirehasbeenraisedoffthe
ground.
OCDW069020
OCDW069021
7.Placethejackatthefront(1)or
rear(2)jackingpositionclosest
tothetireyouarechanging.
Placethejackatthedesignated
locationsundertheframe.The
jackingpositionsareplateswelded
totheframewithtwotabsanda
raiseddottoindexwiththejack.
WARNING
Jack location
Toreducethepossibilityofinjury,
besuretouseonlythejackprovided
withthevehicleandinthecorrect
jackposition;neveruseanyother
partofthevehicleforjacksupport.
8.Insertthejackhandleintothejack
andturnitclockwise,raisingthe
vehicleuntilthetirejustclears
theground.Thismeasurement
isapproximately30mm(1.2in).
Beforeremovingthewheellug
nuts,makesurethevehicleis
stableandthatthereisnochance
formovementorslippage.