A. Operation
LED Light is designed for curing gel polish. This lamp has a specialized
pre-programmed timer to ensure accurate curing. A rechargeable lithium bat-
tery is included in this cordless model.
48W Power (Max) with a service life of 67,000 hours.
1 BEYOND PRO RECHARGEABLE LED LAMP Vol II
(It contains 5200mA 18650 rechargeable lithium battery)
1 DC Adapter (DC15V 3A)
1 User’s Manual
1 Warranty Card
2
1
1- Removable battery.
2- Infrared radiation automatic
induction.
3- Strategically placed LEDs for
efcient curing time. (Prism lighting
for clients visual comfort).
4- Easily sanitizable & removable
stainless steel tray.
5- LCD timer display with battery
power indicator.
6- Power switch: battery or DC
adapter.
7- Built In handle for convenient
mobility.
8- Custom preset cure time 15, 30,
60, & 90 seconds with optional low
heat feature.
4
3
5
6
7
8
PACKAGE INCLUDES
OPERATION INSTRUCTIONS
PRODUCT DESCRIPTION
FUNCTION DESCRIPTION
2. Touch the 15s timer switch, the timer display will count down and LED Lights will
illuminate. The lights will turn off automatically after the preset time is up. To choose
another time, touch the switch (30s/60s/90s) once, touch again to start count down and
light illumination. The light will turn off automatically. Repeat as necessary to cure gel.
3. This LED Lamp is equipped with an infrared motion sensor to turn the light on and
off. Choose the time desired by one touch of the switch (15s/30s/60s/90s). The default
time is 15s. Slide the hand or foot into the machine, the light will turn on automatically
and the timer will count down for the time selected. The light will turn off automatically at
zero or when the hand or foot is removed.
4. The light will go into sleep mode if there is no activity for 5 minutes. Touch any switch
on the operation panel to resume into normal working mode.
The status of the battery power indicator is as follows:
5. 90s Low Heat Mode:
4 time periods: 15s, 30s, 60s, 90s
Power increase: 8W, 15W, 30W, 48W*90%
The brightness of the LED lamp in each time period is a process of increasing power.
NOTE: A fully charged battery provides approximately 2
hours of continuous use.
Indicator 1 Indicator 2 Indicator 3 Indicator 4 Description
FLASH 25% power
ON 50% power
ON ON 75% power
ON ON ON 90% power
ON ON ON ON Full power
B. How to charge
It’s best to connect the adapter to charge when the battery is lower than 20%, the
battery power indicator will icker. This means a critically low-battery and the lamp will
not work, you must connect adapter to charge.
1. Turn the button on the back of machine to “ | ” position, the switch for the 15s timer
will light up when the machine is in work mode.
Indicator 1 Indicator 2 Indicator 3 Indicator 4 Description
Flash 25% power
ON Flash 50% power
ON ON Flash 75% power
ON ON ON Flash 90% power
ON ON ON ON Full power
1. The LCD screen will not reect timer and power levels in the “OFF” position, but it
will charge.
To Next Page
Loading...