DS-Series Coax Speakers
Installation
Your Kicker DS-Series drivers are specifically designed for mounting in free-air applications. The speakers do not require a sealed
enclosure for optimum performance. It is important to isolate the sound coming off the front of the driver from the sound radiating from
the back of the driver. This isolation is usually accomplished by using the correct size driver in a factory speaker location.
Mounting
Use caution when mounting speakers through the rear deck or package tray of a vehicle. Please be aware of wiring harnesses,
trunk springs, hinges, and folding seat mechanisms that may interfere with the operation of the car or speaker system. When running
the speaker wires, be careful not to damage them with seat bolts or door screws.
Installation
6
To Next Page
Loading...
Need help?
General
