11English
NOTE: If you see one or two LEDs on, but you have
to turn the INPUT adjustment up a great deal to get
the others to turn on, this means that the signal is
not full-range and the KEYLOC may have difficulty
restoring it to full-range. This is only a concern if the
system requires a full-range signal. If you are installing
a subwoofer system, it is essential that the “1-LOW”
LED comes on. This indicates you have bass - but
it is not essential that 2-MID or 3-HIGH LEDs come
on if you are using the KEYLOC for a subwoofer only
application.
PWR
1-LOW
2-MID
3-HIGH
4-EQ
Power | Low | Mid | High | EQ
Status LEDs
To Next Page
Loading...