Kicker KSC350 - Important Product Information; Safety Warnings; Speaker Description; Wiring and Impedance

{fKICKER
KS
COAXIAL
AND
3-WAY
SPEAKERS
OWNER'S
MANUAL
MODEL:
KSC350IKSC40IKSC460IKSC4100
KSC5250IKSC60IKSC650IKSC680
KSC690
I KSC6930
IMPORTANT
SAFElY
WARNING
Prolonged continuous operation of
an
amplifier, speaker, or subwoofer
in
a distorted, clipped or over-
powered manner can cause your audio system to overheat, possibly catching
fire
and resulting
in
serious
damage to your components and/or vehicle. Amplifiers require up to 4 inches
(1
Ocm)
open ventilation.
Subwoofers should be mounted with at least 1 inch (2.5cm) clearance between the front of the speaker and
any surface.
KS
COAXIAL SPEAKERS
The
KICKER
KS
speakers offer
an
excellent upgrade to your vehicle's factory sound system, delivering
great
full-range sound at
an
amazing value! Whether dropping the KS speakers
in
a factory location or
customizing your install, their high-efficiency design means less power
is
needed to play your music, while
our use of advanced materials and construction techniques ensures optimal performance for years to
come.
Connect wiring to terminals
t
2
WIRING
We recommend using 16 gauge (or
larger) wire. The
KS
Speakers are rated
at 4 ohms and work with any source unit
or amplifier designed to operate at a 4
ohm load.
Make
sure your source
unit
or
amplifier
is rated for 4 ohm
operation.
Two KS Speakers wired
in
paralfel
to a single channel
Total
Impedance: 2 ohms
source unit
I
amplifier
t
+
Two KS Speakers wired
in
series to a single channel
Total Impedance: 8 ohms
t