Enclosure Mounting: Remove the M5x16 Screws and Lower Clamp
using a 4mm hex key, then position the Upper Clamp along the bar you wish
to mount the enclosure to. Use the Large & Small Adapters for smaller
bar-mounting applications. Attach the Lower Clamp to the Upper Clamp with the
M5x16 Screws using a 4mm hex key.
Speaker Orientation: Slightly loosen the M8X20 Screw using a 6mm hex
key and the M5x40 Screw using a 4mm hex key. Aim the speaker enclosure
at the listener’s head and orient the logo as desired. Do not rotate the speaker
too far (± 45°) and damage the internal wiring. Retighten the screws.
No Adapter: 1-1/4 inches (32mm)
Large Adapter: 1 inch (25mm)
M5x40 Screw
M8x20 Screw
Small Adapter: 7/8 inch (22mm)
Use with Large Adapter
1
2
Learn more about powersports sound systems we have.
To Previous Page
Loading...
