Installation Instructions
These enclosures combine KICKER’s Comp subwoofers with computer
designed and human-fine-tuned enclosures. They offer a level of bass per-
formance never before thought possible from a commercially available
enclosure. The TS Series enclosures are covered in carpet for protection and
pre-loaded with a Comp 10 inch woofer.
KICKER TC enclosures are designed
to fit behind the seat of a pickup
truck. They are engineered to provide
the best bass response when firing
into the back of the truck seat.
Plug your subwoofer speaker wires
into the terminals located on the back
of the box; the red connectors are
positive and the black connectors neg-
ative. Hook the other end of these
wires to your subwoofer amplifier in
accordance with its owners’ manual.
MModel
Woofer Imp. Power Top Bottom Height Width
Handling Depth Depth
(Watts) (In., cm) (In., cm) (In., cm) (In., cm)
TTC1100
Comp 10 4 125
44
-1/2”,11.43
77
-3/4,19.69
1155
”, 38.1
2222
”, 55.88
TC10
Sealed Enclosure Systems
Specifications
Congratulations! You have just purchased one of the most flexible subwoofers
yet from KICKER. Your Comp sub is designed to give you great bass performance
in a wide variety of applications. These installations instructions will help you get
the most out of your new KICKER sub. Thanks for buying KICKER. Enjoy!
To Next Page
Need help?
General
