Kicx SP 4.80AB - User Manual

Questions and Answers

Y
ygarciaAug 12, 2025
What to do if Kicx Amplifier is not working?
- D
  Darlene McgeeAug 12, 2025
  If your Kicx Amplifier isn't working, there are several potential causes: * The REMOTE (control wire) might not be connected or receiving a signal. Ensure the control wire is properly connected to +12V. * A fuse might be blown. Check the fuse on both the battery and the amplifier, and replace any blown fuses. * The power cable '+' or '-' might not be properly connected. Inspect the cables for integrity and ensure a solid ground connection.
R
robert72Aug 21, 2025
Why does my Kicx Amplifier sound distorted?
- D
  Danielle OliverAug 21, 2025
  Distorted sound from your Kicx Amplifier can stem from several factors: * The crossover might not be correctly set. Adjust the crossover according to the provided instructions. * The speaker could be wheezing. Inspect the speaker's operation and replace it if it's broken. * The output power might be too high. Reduce the volume. * The impedance might be too low for the amplifier. Check the dynamics of resistance; if it's below 2 Ohms, use a serial connection.
D
David KellySep 1, 2025
What to do if Kicx Amplifier keeps turning on and off?
- J
  Janet ClarkSep 1, 2025
  If your Kicx Amplifier is repeatedly turning on and off, it could be due to: * Thermal protection being activated because the amplifier temperature exceeds 90 degrees. Ensure sufficient ventilation around the amplifier. * A short circuit in the wiring. Inspect the wiring for any short circuits.

Kicx SP 4.80AB Specifications

General

Brand	Kicx
Model	SP 4.80AB
Category	Amplifier
Language	English