MATERIAL SAFETY DATA SHEET
MSDS Number:
00057
Effective Date:
04/20/2001
Product Name: FM-200 Page:
2 of 7
SECTION III - HAZARDS IDENTIFICATION
Medical Conditions Generally
Aggravated By Exposure: Persons with preexisting cardiac, respiratory, or central nervous
system disorders may be more susceptible to effects of an
overexposure. The use of epinephrine or similar compounds can
increase susceptibility to heart irregularities caused by excessive
exposure to these types of compounds.
Potential Health Effects: See Section XI for additional information.
Eyes: Direct eye contact with the liquid or cold gas can cause chilling or
possibly frostbite of exposed tissues.
Skin: Direct skin contact with the liquid or cold gas can cause chilling or
possibly frostbite of exposed tissues.
Ingestion: Not expected to be a hazard in normal industrial use.
Inhalation: Inhalation of high concentrations can be harmful or fatal due to
oxygen deprivation and/or heart irregularities (arrhythmias). Misuse
of the product by deliberately inhaling high concentrations of this gas
could cause death without warning.
Chronic Health Effects: None known
Carcinogenicity:
NTP: No ACGIH: No
IARC: No OTHER: No
OSHA: No
Additional Information
No information available
SECTION IV - FIRST AID MEASURES
Eyes: Flush with water. Get medical attention.
Skin: Flush with water; if frostbite occurs get medical attention.
Ingestion: No information available
Inhalation: Remove person to fresh air; if not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical
attention.
Antidotes: No information available
Notes to Physicians and/or
Protection for First-Aiders: The use of epinephrine or similar compounds can increase
susceptibility to heart irregularities caused by excessive exposure to
these types of compounds.
Additional Information
No information available
SECTION V - FIRE FIGHTING MEASURES
Flammable Limits in Air (% by
Volume): Not applicable
Flash Point: Nonflammable gas
Autoignition Temperature: Not available
Extinguishing Media: All conventional media are suitable.
Fire Fighting Instructions: Keep cylinders cool with a water spray applied from a safe distance.
Use a self-contained breathing apparatus if containers rupture or
release under fire conditions. Do not allow reentry into areas where
this material has been released without first ventilating to remove
products of combustion/decomposition.
To Next Page
Loading...