Kids First Coding & Robotics - Challenge 7: Hammer the Object

10
70 mm
DONE
7
8
9
Set up the map cards
as shown. Place a small
object for the hammer
robot to hammer on the
map card as shown.
Create a program with
the code cards to move
the hammer robot
from the Start card to
the event map card A,
where it will hammer
the object a few times
(or pretend to). Then,
program the robot to
move to map card B.
A
B
MAP
Use the Start and event
map cards and code
cards from the base kit.
Place a small
object for the
hammer robot to
hammer on the
map card here.

HAMMER
CHALLENGE 7 HAMMER THE OBJECT