Toggle the Switch on the back to macOS mode
Pressing FN+\ at the same time allows you to switch the RGB eect of your Phantom
81 keyboard
Long press the FN+1/2/3 for 3 seconds, the keyboard will start pairing and the light will
flash. If there’s no connection, the keyboard will enter into sleep mode.
Long Press for 3 seconds to pair Bluetooth device
FN + 1/2/3
Short Press to switch to last paired device
FN + 1/2/3
Firstly, turn on the keyboard via the switch on the keyboard’s bottom. Then plug the
receiver into your device. After being recognized by your device, press and hold FN+4
for 3 seconds you will see the 4 key’s backlit flashes. When the LED stays on the green,
the pairing is successfully done.
Long Press for 3 seconds to pair Wireless 2.4g
FN + 4
Switch to Wireless Mode
FN + 4
BLUETOOTH & WIRELESS 2.4GHz SPECIFICATIONS
Operating system should be windows 8 or above to support the Bluetooth function.
The device should support Bluetooth 5.0 or a higher version to use Bluetooth 5.0.
If you switch devices and/or systems, please make sure to toggle independent switch
to change the keyboard layout according to the system you used, or some shortcuts/
multimedia keys may not work properly.
If your keyboard is sleeping press any key to wake it up, it will remember the last device
connected.
DO YOU NEED ANY MORE HELP?
For technical assistance, please email to support@kiiboom.com with your purchase
order number and a detailed description of your issue.
To Next Page
Loading...