KIKKA BOO CALDO - User Manual

Need help?

Do you have a question about the KIKKA BOO CALDO and is the answer not in the manual?

Overview

The Kikka Boo Caldo bottle warmer is a 4-in-1 device designed for warming milk and food, sterilizing, and defrosting, suitable for use from 0m+.

The device offers four primary functions:

Milk Warming (A): Designed to warm milk to an optimal temperature. It can be used with various bottle types (glass or plastic) and milk volumes. The default setting for milk warming is 37°C for 24 hours, with a setting range of 2-59 minutes, 2-24 hours.
Food Warming (B): Suitable for warming baby food. The default setting for food warming is 70°C for 6 hours, with a setting range of 2-59 minutes, 2-24 hours. The maximum capacity for food warming is 160ml.
Sterilization (C): Sterilizes bottles and accessories using steam at 100°C. The default sterilization time is 10 minutes, with a setting range of 5-20 minutes. It can sterilize up to 100-150ml of water.
Defrosting (D): Gently defrosts frozen milk or food. The default defrosting temperature is 37°C for 24 hours, with a setting range of 2-59 minutes, 2-24 hours. The maximum capacity for defrosting is 160ml.

The device features a digital display and control panel with several indicators and buttons:

Temperature/time display.
"Plus" button for increasing temperature/time.
"Minus" button for decreasing temperature/time.
Power ON/OFF button.
Function selection button (cycles through milk warming, food warming, defrosting, sterilization).
Defrosting indicator.
Sterilization indicator.
Food warming indicator.
Milk warming indicator.

Model: Caldo Bottle Warmer
Power Supply: 220-240V~, 50-60Hz
Power: 400W
Temperature Range:
- Milk Warming: 35-60°C
- Food Warming: 50-80°C
- Defrosting: 32-42°C
- Sterilization: 100°C
Capacity: Max 160ml for food/defrosting, 100-150ml for sterilization water.
Safety Features: Automatic shut-off when water runs out during sterilization.

The device is designed for ease of use with a clear digital display and intuitive controls.

Assembly: The device consists of a main control panel (3), a heating plate (2), and a transparent cover (1).
Operation:
1. Place the desired bottle or container into the heating plate.
2. Add the appropriate amount of water (e.g., 40ml for milk warming, 100-150ml for sterilization).
3. Select the desired function using the function selection button (5).
4. Adjust temperature and time using the "plus" (2) and "minus" (3) buttons.
5. Press the ON/OFF button (4) to start the operation.
Milk Warming Details:
- For glass bottles, initial temperature 5°C, 40ml water: 60ml milk takes 2 mins, 120ml takes 3.5 mins, 180ml takes 4.5 mins, 240ml takes 5.5 mins.
- For glass bottles, initial temperature 20°C, 40ml water: 60ml milk takes 1.5 mins, 120ml takes 2.5 mins, 180ml takes 3 mins, 240ml takes 3.5 mins.
- For plastic bottles, initial temperature 5°C, 40ml water: 60ml milk takes 2.5 mins, 120ml takes 3.5 mins, 180ml takes 4.5 mins, 240ml takes 5 mins.
- The device will automatically maintain the set temperature for the duration of the warming cycle.
Food Warming Details:
- Recommended for warming baby food to 70°C.
- The device will maintain the set temperature for 6 hours by default.
Defrosting Details:
- Gently thaws frozen milk or food at 37°C.
- The default defrosting time is 24 hours.
Sterilization Details:
- Requires 100-150ml of water.
- Sterilizes at 100°C for 10 minutes by default.
- The device will automatically shut off when the water runs out.

Cleaning:
1. Always unplug the device and allow it to cool before cleaning.
2. Wipe the exterior with a damp cloth. Do not immerse the device in water.
3. Clean the heating plate and inner parts with a soft, damp cloth and mild detergent. Rinse thoroughly.
4. For descaling, use 100ml of water and 10g of citric acid. Run the sterilization function for 10 minutes. After descaling, rinse with clean water 3-4 times.
5. Do not use abrasive cleaning agents, scourers, or harsh chemicals.
Storage: Store the device in a clean, dry place away from direct sunlight when not in use.

Always ensure the device is placed on a stable, flat, heat-resistant surface.
Do not operate the device without water in the heating plate.
Keep out of reach of children.
Always check the temperature of milk or food before feeding.
Unplug the device when not in use or during cleaning.
Do not attempt to repair the device yourself; contact a specialized service center for repairs.
Ensure the power cord is not damaged or placed near hot surfaces.
The device is for household use only, not for commercial or industrial applications.

General