Need help?Do you have a question about the Kiloview N6 and is the answer not in the manual?
General| Encoding | H.264, H.265 |
|---|---|
| Decoding | H.264, H.265 |
| Resolution | Up to 4K |
| Power Supply | DC 12V |
| Audio Input | HDMI, 3G-SDI |
| Audio Output | HDMI, 3G-SDI |
| Audio Encoding | AAC |
| Network Interface | 1 x Gigabit Ethernet |
| Protocols | RTMP, RTSP, SRT, HLS |
| Management | Web UI |
| Video Input | HDMI, 3G-SDI |
| Video Output | HDMI, 3G-SDI |
Details the dual NDI encoding/decoding, resolution, display, PoE, and interfaces.
Lists input/output, audio, network, USB, resolution, codecs, display, tally, power, PTZ, DHCP, management, consumption, dimensions, weight, and temperature.
Connects power, network, and video input sources for initial setup.
Describes connecting the device to the network via wired connection and obtaining IP/DNS.
Explains how the device auto-discovers and pulls NDI streams using other tools.
Details switching to decoding function and discovering/selecting NDI sources for output.
Lists all items included in the package, such as the device, adapter, and manual.
Details the physical ports and connectors on the N6 and N5 models.
Explains the meaning of different LED lights and their status indications.
Guides connecting video sources (HDMI/SDI) to the device's input and output.
Explains connecting the device to a network via RJ45 connector to a switch or computer.
Details connecting the device using the standard power adapter or PoE.
Explains how to navigate and operate the device using the front panel touch buttons.
Details the information shown on the LCD: CPU usage, memory, temperature, and firmware version.
Explains how to switch between Encoder and Decoder modes and related settings.
Describes how the LCD shows real-time network up/down rates and DHCP IP address.
Guides on how to log in to the device via its IP address using a web browser.
Explains configuring the device's IP address, gateway, and DNS settings.
Instructions for downloading and installing the NDI Tools software from NewTek.
How the device is discovered on the network by other NDI-compatible tools.
Discusses required network speeds and provides a table of bandwidth for different resolutions.
Explains the NDI converter's function and how to toggle NDI|HB/HX encoding modes.
Describes the information displayed in the device's interface, like video source, resolution, and audio.
Explains NDI protocol and how to configure parameters via 'Basic Settings'.
Details different NDI connection modes like RUDP, TCP unicast, and UDP multicast.
How the device automatically discovers NDI sources on the LAN.
How to select an NDI source for decoding and direct output.
Allows adding and managing up to 9 preset decoding sources for quick switching.
Explains how to set decoding parameters, change group, and NDI channel name.
Manages user accounts, passwords, and HTTP API authorization for security.
How to perform a software reboot of the device.
Procedures to reset the device to its original factory default configuration.
Instructions for updating the device firmware using an upgrade package.
Guides on upgrading firmware via recovery mode using a USB flash drive.
Explains configuring and using PTZ control for network and serial PTZ cameras.
Allows importing, exporting, and resetting EDID files for display compatibility.
Details how to connect devices to the KiloLink Server platform for unified management.
To Next Page
