8.4 Streaming service
Login to the KiloLink bonding platform webpage, click any area in the line of the online
device under “Device Management", and the device streaming service and video preview
window will pop up.
Introduction
Please make sure that your device firmware has been updated to the latest version, please refer to Chapter
9 "Firmware Upgrade" to download and update the device
⚫ Server address: The IP address of the bonding server, which support domain names.
⚫ Port: The default port is 60000.
⚫ Auth Code: Generated when adding the device to the bonding platform.
Introduction
⚫ Streaming with the streaming service of the bonding platform, all traffic will be transmitted through
the aggregation link. If the streaming service is pushed on the web page of the device, it will only be
transmitted through a single network, and the network link is not selectable.
⚫ The maximum bitrate of the streaming cannot exceed the code rate configured on the encoder. When
the network link bandwidth is not enough, the streaming service will adaptively reduce the output
bitrate.
To Next Page
Loading...
Need help?
General
