96
©2021 Kimberley Kampers Manufacturing Pty Ltd
1. Attach Draught Skirt to
fasteners around lower body
and chassis.
2. Insert wall inlls in front & rear
vertical sail track on side of
canopy.
3. Erect Kwik Awning with canopy
still lowered.
4. Attach Rear Wall with Zip. Start
Zip at end closest to canopy.
5. Lift canopy now if only using
rear wall. This can be good if
wind direction suits.
6. Install Front Wall.
7. Raise canopy to full height and
install vertical support poles to
stabilise awning and walls.
8. Door Window ap can be rolled
up for improved airow and
lighting.
9. Enjoy the breeze with the end
Window Flaps rolled up.