ADDITIONAL SPECIFIC SAFETY INSTRUCTIONS
• Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory may
contact hidden wiring. Cutting accessory contacting a “live”
wire may make exposed metal parts of the power tool “live” and
could give the operator an electric shock.
• Use clamps or another practical way to secure and support
the work piece to a stable platform. Holding the work by hand
or against your body leaves it unstable and may lead to loss of
control.
• Hold saw firmly with both hands for all cutting operations.
During cutting operations, the blade may suddenly bind in the
work and may cause the saw to kickback towards the operator.
• Keep hands away from moving parts. Never place your hands
near the cutting area.
• Use extra caution when cutting overhead and pay
particular attention to overhead wires which may be
hidden from view. Anticipate the path of falling branches and
debris ahead of time.
• Do not operate this tool for long periods of time. Vibration
caused by the operating action of this tool may cause permanent
injury to fingers, hands, and arms. Use gloves to provide extra
cushion, take frequent rest periods, and limit daily time of use.
To Next Page
Loading...
Need help?
General