kincrome TOOL CHEST - Chest and Trolley Combination; Cover Assembly

Assembly Instructions
1
1
2
4
3
2
3
4
40kg+
This product requires a two person lift
- use proper lifting techniques
Bunnings Weight Icons (2676) 30/3/04 10:11 AM Page 3
CHEST & TROLLEY COMBINATION
TO PLACE CHEST ON CABINET
When securing the Top Chest and Bottom Roller
Cabinet together, remove the liner so that the
chest bottom will fit tightly into the recessed area
of the cabinet. This will help prevent the chest
from slipping or tipping over.
CAUTION
For your safety, DO NOT install castors by yourself.
Installing the Castors requires TWO PEOPLE due to
having to lay the tool chest on its back and to stand
it up once the castors are installed. Failure to follow
this warning may result in personal injury and
damage to the tool chest.
COVER ASSEMBLY
TO ASSEMBLE COVERS
When using both covers for the Top Chest and
Bottom Roller Cabinet, zip the two covers together
to create one cover. Otherwise the covers can be
used individually.
To unzip the cover top of the bottom cover
To zip the top cover and bottom cover up
To place the cover over the rolling chest
K7308
TOOL CHEST
9 DRAWER
Unzip cover top
Cover top
Bottom cover
Top cover
Bottom cover
Zip up top and
bottom cover
2