This document provides assembly instructions and important information for the Kinder Valley Cot Bed.
Function Description:
The Kinder Valley Cot Bed is a versatile piece of nursery furniture designed to accommodate a child from birth up to approximately 4 years of age. It functions initially as a cot, offering three adjustable mattress base positions to ensure safety as the baby grows. The lowest position is recommended once the baby can sit up. As the child develops and is able to climb out of the cot, it can be converted into a junior bed. This conversion extends the product's usability, transitioning from a secure sleeping environment for infants to a suitable bed for toddlers. The design emphasizes safety, with clear warnings and guidelines for proper assembly, use, and maintenance.
Important Technical Specifications:
- Product Size: 144cm x 76cm x 80cm (Note: Size may vary).
- Compliance: Conforms to BS EN716:2008+A1:2013 for cot mode and BS 8509:2008+A1:2011 for child's bed mode.
- Age Suitability:
- Cot Mode: Suitable from birth.
- Bed Mode: Minimum age not less than 18 months, maximum age not more than 4 years old.
- Mattress Base Positions (Cot Mode): 3 adjustable positions. The lowest position is the safest when the baby can sit up.
- Mattress Thickness Requirement:
- Internal height (surface of mattress to upper edge of cot frame) must be at least 500 mm in the lowest position.
- Internal height must be at least 200 mm in the highest position.
- Recommended Mattress Size: 140cm x 70cm.
- Mattress Gap Requirement: The gap between the mattress and the sides and ends must not exceed 30 mm.
- Assembly Time: Approximately 1 hour.
- Assembly Personnel: Two adults are required for assembly.
- Origin: Produced in Poland for Kinder Valley.
Usage Features:
- Convertible Design: Easily converts from a cot to a junior bed, extending its lifespan and value.
- Adjustable Mattress Height: Three base positions in cot mode allow the mattress height to be adjusted as the baby grows, ensuring safety and ease of access for parents.
- Safety First: Designed with safety in mind, including warnings against open fires, strong heat sources, and the use of broken or missing parts.
- Clear Assembly Instructions: Detailed, step-by-step instructions with diagrams are provided to guide users through the assembly process for both cot and junior bed configurations.
- Included Tools: An Allen key is provided for assembly.
- Storage and Transportation: The cot bed is designed to be dismantled and packed flat, facilitating easy storage or transportation.
Maintenance Features:
- Regular Checks: All assembly fittings should be checked regularly and retightened as necessary to prevent loose fittings, which can pose a risk of snagging or strangulation.
- Cleaning: Use only a mild detergent and warm water for cleaning. Bleach or abrasive substances should not be used.
- Spare Parts: Only spare parts approved by Kinder Valley should be used.
- Customer Support:
- A dedicated customer service line (0844 7744644) is available for missing assembly instructions, missing or damaged parts.
- Email support is also available at sales@kinder-valley.com.
- Warranty: The Kinder Valley Cot is guaranteed for 12 months from the date of purchase. Users are advised to retain their receipt as proof of purchase.
- Placement Guidelines:
- Avoid placing the cot bed near heat sources, windows, blind cords, curtain pulls, or other strings/cords to prevent suffocation or strangulation hazards.
- In bed mode, the child's bed should either be placed tightly against a wall or have a gap of 30cm between the wall and the side of the bed.
- Ensure the cot bed is used on firm, horizontal, and dry ground.
Need help?
General
To Next Page
