18
• Keep children away when unfolding and folding the
product to avoid injury.
• Product located under a window could be used as a step
by the child and cause the child to fall out of the window.
1. Parts:
1.
2.
3.
4.
5.
2. Assembly and adjustment:
Legs
Remove the foam pads from the tube ends before assembly. To unfold the seat (1), pull the
backrest (fig. A). Pull the backrest towards you until you hear a characteristic 'click' (fig. B).
Mount the legs (2) to the seat (1). To do this, turn the seat upside down. Insert the legs (2) into
the tubes so that the pins are in the holes of the legs (1) (fig. C). A characteristic 'click' indicates
correct assembly. Repeat for the back legs (2). Stand the chair on its legs.
Tray
Footrest
Then mount the footrest (4). As with the leg assembly, insert the tube with the pin into the
designated hole (Fig. F). A characteristic 'click' indicates correct assembly. The footrest can be
set in two different positions by pushing in the pin and adjusting the appropriate level.
WARNING! Do not stand on the footrest.
Backrest adjustment:
Safety harness:
To Next Page
Loading...
