2. Turn on power to KING Jack antenna.
3. Perform a channel scan per the digital TV or digital TV
Choose one of those channels on your TV. Now monitor the signal strength
Page 4
www.kingconnect.com for additional information.
IMPORTANT! Do not power wash any part of the KING Jack antenna.
OPERATING INSTRUCTIONS: Scanning for Channels
LIMITED WARRANTY
of replacement parts after one year.
• Circumstances beyond the control of KING cause the product to no longer operate correctly.
• Customer is not the original owner.
In no event shall KING be liable for any indirect, incidental, or consequential damages from the sale or use of the product. This disclaimer applies both during and after the term of the warranty.
TROUBLESHOOTING
COURSE OF ACTION
No TV reception. No power to antenna.
is not lit.)
Antenna pointed in wrong
direction.
(sold separately)
11200 Hampshire Avenue South, Bloomington, MN 55438
PH 952.922.6889 || FAX 952.922.8424 || kingconnect.com
NOTE:
channels each time you change locations.
NOTE:
Winegard is a registered trademark of Winegard Company.
KING Jack are products of KING
®
®
Company.
To Previous Page
Loading...
