Kingfisher DDD500WT151DA - Page 12

12
Quick startQuick start
SETTING THE TIME
- Press MENU, then + to access the Hor menu.
- Press OK-boost to enter this menu.
- Press + or - to set the day of the week :
d1 = Monday, d2 = Tuesday,...., d7 = Sunday.
- Press OK-boost to validate
- Press + or - to set the hour.
- Press OK-boost to validate.
- Press + or - to set the minutes.
- Press OK-boost to validate.
- Press + or - to select automatic (Aut) or manual (ΠAn) time setting.
- Press OK-boost to validate.
- Press MENU to exit the menu
Ifthe iconpermanentlyashesinprogrammemode(ProorEcP),this
indicatesthatthetimeisosetfollowingapowercut.Itisashingasatime
hasnotbeenset.
Followingapowercut,theappliancewillautomaticallyrestartwithallofthe
settingsusedbeforethecut(ifitwasonorstandbybeforethecut,itwill
stayonorstandbyafterthecut).
AutomatictimesettingisnotpossibleoutsideFrance.
Selectmanualtimesettingifdailyautomatictimesettingisincorrect.
WEEKLY PROGRAMMING
 Thetimemustbesetbeforeanyprogramming.
 Therearetwoprogrammersavailable.Theycomprise6programs:Pr1 to
Pr6forone,and3programs,Ec1 to Ec3fortheother.SelectingProorEcP
modeactivatesoneortheother.
 Thetimeperiodforoneprogrammemayoverlapthetimeperiodofanother.
Inthiscase,BoostisprioritisedoverComfortmode.
Secondary programmes and functions