EN
FPCSP41-3
Getting started...
10
Technical and legal information
Safety warnings
12. Do not operate a product that is damaged, improperly
adjusted, or not completely and securely assembled.
Be sure that the saw chain stops moving when the
throttle trigger is released.
13. Do not operate this product in a tree unless you have
been specically trained to do so. Operation of the
product while up in a tree may result in personal injury.
14. Do not operate your product near or around ammable
liquids or gases.
15. Do not smoke whilst operating the product.
16. Do not lock the product over xed stands.
17. Do not grip the handles with constant or excessive
pressure; this will increase the feeling of vibration and
the risk of ‘whitenger’ disease.
18. Do not over reach when operating the product or cut
above shoulder height.
19. Do not operate the product if it is leaking fuel or chain
oil.
20. When cutting a limb (branch) that is under tension, be
alert for spring back so that you will not be struck when
the tension in the wood bres is released.
21. Always keep proper footing and operate the chain saw
only when standing on xed, secure and level surface.
Slippery or unstable surfaces such as ladders may
cause a loss of balance or control of the chain saw.
22. Cut wood only. Do not use the product for purposes not
intended. For example: do not use chain saw for cutting
plastic, masonry or non-wood building materials. Use
of the chain saw for operations different than intended
could result in a hazardous situation.
MNL_Petrol Chainsaw_FPCSP41-3_GB_V02_220301.indd 10 3/2/22 11:35 AM
To Next Page
Loading...