Before you start
26
Assembly
WARNING! Fuel and oil are highly inammable! Fumes will explode if
lit! Ensure that there are no naked ames around the product! Do not
smoke while lling fuel and oil!
1. Place the product on a stable, level surface. We recommend laying a non-
ammable sheet under the product.
2. Use proper funnels. Avoid spilling and overlling the tanks.
3. Always dispose of fuel, used oil and soiled objects according to local
regulations (see section “Recycling and disposal”).
Fuel
WARNING! This product is not supplied with petrol-oil mixture in the
engine! Before operating this product it is essential to ll it with petrol-
oil mixture!
1. Mix a regular-grade unleaded petrol and
a quality engine oil for air cooled 2-stroke
engines in the supplied fuel mixing bottle
(30) (Fig. 13).
2. Use an anti-oxidant added quality oil
expressly labelled for air-cooled 2 stroke
engine use (JASO FC GRADE OIL or ISO
EGC GRADE).
3. Do not use BIA or TWC (2 stroke water-
cooling type) mixed oil.
4. The recommended mixing ratio for petrol: oil
is 40:1.
5. The table indicates a reference for the
quantities of petrol and oil to use for the
preparation of the mixture. Fig. 13
6. Only use the scale 40:1 of the mixing bottle as reference for this product.
7. Petrol and oil have to be lled in respective sides accordingly to the scale
marking on the bottle. For example, ll petrol to scale marking “5” rst, and
then ll 2-stroke oil to scale marking “5”. This indicates a correct ratio of 40:1
when using the scale 40:1.
1. Mix a regular-grade unleaded petrol
and a quality engine oil for air cooled
2-stroke engines in the supplied fuel
mixing bottle (31) (Fig. 12).
2. Use an anti-oxidant added quality oil
expressly labelled for air-cooled 2
stroke engine use (JASO FC GRADE
OIL or ISO EGC GRADE).
3. Do not use BIA or TWC (2 stroke
water-cooling type) mixed oil.
4. The recommended mixing ratio for
petrol: oil is 40:1.
5. The table indicates a reference for
the quantities of petrol and oil to use
for the preparation of the mixture. Fig. 12
MNL_Petrol Chainsaw_FPCSP41-3_GB_V02_220301.indd 26 3/2/22 11:35 AM
To Next Page
Loading...