Kingfisher FPCSP41-3 - Page 54

EN
54
EN
Care and maintenance
In more detail...
FPCSP41-3
Maintenance
Part
To do Before/
after
each use
10 hours 25 hours 50 hours
/ half
year
100
hours /
once a
year
Cylinder
n
clean x
Spark plug check x
clean x
replace
Air lter check x
clean x
replace whenever necessary
Fuel lter check x
clean x
replace whenever necessary
Saw chain check x
lubricate x
clean x
replace whenever necessary
Spare parts/Replacement parts
The following parts of this product may be replaced by the consumer. Spare parts
are available at an authorised dealer or through our customer service.
Description Model no. or Specication
Spark plug (7a) L8RTF
Saw chain (10) 3/8"LP-050"-53DL
Guide bar (11) M1501453-1041L
NOTE: If non-approved saw chain and guide bar combinations are
used, it will result in serious or fatal injury to the operator.
MNL_Petrol Chainsaw_FPCSP41-3_GB_V02_220301.indd 54 3/2/22 11:36 AM