3
Assembly
Remove the empty cartridge attached to the atomizer and throw it away. (this
cartridge does not have a silicone plug or e-liquid and will ruin the atomizer if used)
Screw the atomizer onto the battery.
If you have e-liquid, it is best to put 4 drops on the atomizer before connecting to
the cartridge. The new atomizer is dry and takes time to wick the e-liquid out of the
cartridge. The worst thing you can do is vape on a dry atomizer, it will give it a bad
taste that is hard to get rid of.
Remove a cartridge from its wrapper and remove its protective cap. If the cartridge
is empty, ll it with desired e-liquid. (see Relling portion of the Usage section)
Twist the cartridge a full turn clockwise while slowly pushing it into the atomizers
to keep the silicone plug from getting stuck in the cartridge.
1
2
3
4
5
To Next Page
Loading...