KINROAD 150 SERVICE MANUAL VERSION 1, DEC., 2005
5
FUEL AND OIL RECOMMENDATIONS
Be sure to use the specified fuel and oil
.
FUEL
Gasoline should SAE 90# or higher
.
Unleaded gasoline is recommended.
ENGINE OIL
SAE10W-30 engine oil of high quality should be used
.
BREAK-IN PROCEDURE
For the first 2 hours of riding, do not exceed 2/3 throttle
.
Vary engine speed for the first 5 hours.
Never hold engine at full throttle for long periods of time.
SPECIFICATIONS
DIMENSIONS DOUBLE SEAT/SINGLE SEAT
Overall Length 2159mm/2075mm
Overall Width 1400mm/1235mm
Overall Height 1470mm/1400mm
Wheelbase 1499mm/1450mm
Ground Clearance 170mm/130mm
ENGINE
Type Forced air-cooled, single cylinder, 4-Stroke
Engine Capacity 150cc
Displacement 149.5cc
Bore x Stroke 57.4mm x 57.8mm
Compression Ratio 9.2:1
Max Power 7.4kw/7500rpm
Max Torque 9.5N.m/5500rpm
Fuel Type SAE 90# or above (unleaded)
Lubricate Oil SAE 10W/30
Ignition C.D.I.
Starting Electric
Spark Plug C7HSA (NGK)
Transmission Automatic C.V.T.
Carburetor MIKUNI, BS24J
Lubrication Force & Splash
To Next Page
Loading...