10
-13PERIODIC SERVICE
(1) Grease Fitting (Top Link Bracket)
EVERY 50 HOURS
LUBRICATING GREASE FITTINGS
You should apply a small amount of multi-purpose grease to the following points every 50 hours or as needed.
If your tractor is operated in extremely wet, muddy, or dusty conditions you should lubricate the fittings more often.
(1) Grease Fitting (Front bracket axle pivot)
(2)
Grease Fitting (Power steering cylinder)(RH,LH)
(1) Grease Fitting (Brake Lever RH, LH)
(1)
Grease Fitting (Power steering cylinder) (RH, LH)
(1) Grease Fitting(Top Link Holder)
(2) Grease Fitting (Hydraulic Cylinder Support)
(3) Grease Fitting (Lift Rod)
(1) Grease Fitting (Rear Bracket Axle Pivot)
T46OA20A
T46OA23A
T46OA21A
T46OA24A
T46OA22A
T46OA25A
To Next Page
Loading...
